Alderley QLD 4051 ยท Northside
EV Charger Installation Alderley
Connex Electrical, a licensed electrical contractor (#92217) based in Mango Hill, installs EV chargers in Alderley. Standard home installs are from $990 installed (inc GST), take about 2 to 4 hours and come with a fixed written quote. Alderley's hilly streets of character homes mean the charger spot and the switchboard are often on different levels, which is what we price around.
- Licensed electrical contractor #92217
- $20M public liability
- Local team based in Mango Hill
- Fixed written quotes
- Read our Google reviews
Garages, slopes and old boards in Alderley
Streets in Alderley climb and drop quickly, and many houses sit well above or below the road. A common setup is a garage tucked under the house or cut into the slope at the front, with the meter box on a side wall. That arrangement is usually good news: cable can run beneath the floor and straight down to the garage without any roof work.
Where the car parks on a driveway pad or in a street-side carport, an outdoor-rated wallbox on a post or wall works well. We think about where the lead will hang when it is plugged in, because on a steep driveway nobody wants a cable stretched across the slope.
Most Alderley homes have single-phase supply. A 7kW charger refills a typical week of inner northside driving in a couple of overnight sessions, so three-phase is rarely worth chasing unless you already have it and your car accepts 11kW.
What an EV charger install costs in Alderley
In Alderley, most home EV charger installs come in at Connex Electrical's standard price of $990 inc GST, with the charger extra unless you already own one. What can add to it is distance from the switchboard to your parking spot, the condition of the board, and whether you want three-phase. All of that is priced upfront in writing.
| Situation | Price |
|---|---|
| Garage or carport close to a modern switchboard | From $990 installed (inc GST) |
| Charger on the far side of the house, or a detached garage | Standard price plus the extra cable, quoted from photos |
| Older board with fuses or no safety switches | Standard price plus a switchboard upgrade, quoted separately |
| Three-phase home with an 11kW or 22kW charger | Quoted per job |
Included as standard: a new charger circuit and protection at your switchboard, cabling within the standard allowance, mounting, app setup, testing and a compliance certificate. The charger itself is extra unless you already own one.
Affordable EV charger installation in Alderley
- Mount the charger on the garage wall closest to the meter box. A shorter run is the easiest saving.
- Send clear photos of the switchboard and charger spot, so we can quote without a site visit.
- Already have a charger from the dealer? We install it, so you only pay for installation.
- If a second EV is coming, size the cable for it now rather than paying for a second callout later.
Alderley is about 21 km from Mango Hill, roughly 25 minutes when the roads are clear. We pair inner north-west bookings together, which helps us offer firm arrival times.
Every Alderley job gets a fixed written price before any work starts, so the quote is what you pay. For a line-by-line breakdown, see the EV charger installation cost guide for Brisbane, or call 0474 207 609.
Before you book in Alderley
Renovated character homes are the norm, but renovations vary. Some boards were replaced when a kitchen or extension went in; others carry a mix of old and new wiring behind a newer cover. We check the board, the main supply size and what already runs on it, such as air conditioning and an induction cooktop, before we quote.
Alderley station on the Ferny Grove line and Samford Road both run through the suburb, so plenty of residents only drive a few kilometres on a weekday. If that sounds like you, smaller top-ups in an off-peak or solar window will do the job, and a charger with scheduling makes that automatic. Our cost guide explains what moves the price.
How the installation works
- Step 1
Quote
Send photos of your switchboard and charger spot, or call. We reply with a fixed written price.
- Step 2
Site check
If anything is unusual, such as a long run or an older board, we check it in person first.
- Step 3
Install
Most standard installs take 2 to 4 hours on the day.
- Step 4
Test and certify
We test, commission the charger with your car and issue your Certificate of Testing and Compliance.
Alderley EV charging FAQs
My Alderley garage is under the house. Is that a good spot for a charger?
Usually it is one of the easiest spots. An under-house garage sits right below the subfloor, so cable can run from the switchboard beneath the floor and drop down to the charger without roof work. We check headroom, whether water runs through the space after heavy storms, and that the unit sits where the cable reaches your car's port comfortably.
How much does EV charger installation cost in Alderley?
A standard single-phase install in Alderley is from $990 inc GST with Connex Electrical, plus the charger unless you already have one. Long cable runs, switchboard upgrades and three-phase chargers cost extra and are quoted in writing first. Most installs take 2 to 4 hours.
How can I keep EV charger installation affordable in Alderley?
Put the charger close to the switchboard, choose a 7kW single-phase unit and send photos so we can quote without a visit. If you already have a charger, you only pay for installation, at the standard $990 inc GST. Every quote is fixed, so there are no surprises on the day.
Can you install a charger in an older Queenslander?
Yes. Older homes just need a closer look at the wiring and switchboard first. Many still have original or partly upgraded boards that lack room or safety switches for a new circuit. The good news is that the space under a high-set Queenslander often makes the cable run easy. We inspect first and quote any switchboard work separately so you can see it.
What is the cheapest way to charge an EV at home in Brisbane?
Charging from your own surplus solar is cheapest, followed by charging overnight on a time-of-use or controlled-load tariff. Energex controlled-load tariffs (Tariff 31 and 33) run on a separate circuit with supply only during set hours, so they suit overnight charging but not daytime solar charging. A time-of-use plan on a smart meter is the usual alternative. Your retailer sets the actual rates. We can wire the charger to suit whichever plan you choose.
Which EV charger should I buy?
Choose on three things: whether you want solar-matched charging, whether you need an app and scheduling, and your budget. A Tesla Wall Connector suits Tesla owners and works with other EVs too. A Zappi or Wattpilot suits solar homes. Simpler units suit plain overnight charging. Tell us your car and setup and we will recommend two or three options.
Also installing near Alderley
See every suburb in Northside, or read about home EV charger installation, commercial and body corporate charging and the cost of installation in Brisbane.
Book your Alderley EV charger install
Send a few details and photos of your switchboard and charger spot. Most homes can be quoted without a visit.
Call 0474 207 609Connex Electrical, QLD Electrical Contractor Licence #92217. $20M public liability. Based in Mango Hill, servicing Brisbane and Moreton Bay.