Annerley QLD 4103 ยท Southside
EV Charger Installation Annerley
Connex Electrical, a licensed electrical contractor (#92217) based in Mango Hill, installs EV chargers in Annerley. Standard home installs are from $990 installed (inc GST), take about 2 to 4 hours and come with a fixed written quote. Annerley mixes Queenslanders and workers' cottages with unit blocks along Ipswich Road, so we install chargers on both houses and in shared car parks.
- Licensed electrical contractor #92217
- $20M public liability
- Local team based in Mango Hill
- Fixed written quotes
- Read our Google reviews
Cottages, Queenslanders and units in Annerley
Annerley's older streets are full of workers' cottages and Queenslanders, many raised and renovated, on smaller inner-city blocks. Where the car parks under the house or in a carport beside it, the charger can usually go on a stump or post with a short run from the board. Original boards are common and often need upgrading before a high-load circuit can be added.
Driveways here can be tight, and some homes have only street parking. A charger needs off-street parking, because the cable cannot cross a footpath. If you have no driveway, we can tell you honestly that a home charger is not practical.
Unit blocks along Ipswich Road and the streets behind it need body corporate approval for anything on common property. Many older blocks have a shared meter room and open car parks, so the cable route and metering need planning. We prepare a written proposal for the committee.
What an EV charger install costs in Annerley
A standard EV charger installation in Annerley costs from $990 inc GST with Connex Electrical for a house or townhouse garage, plus the charger. Older switchboards, long runs and three-phase chargers add to that, and apartment bays are quoted per building. Every job gets a fixed written price first.
| Situation | Price |
|---|---|
| Garage or carport close to a modern switchboard | From $990 installed (inc GST) |
| Older board with fuses or no safety switches | Standard price plus a switchboard upgrade, quoted separately |
| Apartment bay wired from your own meter, once the body corporate approves | Quoted after we check the car park route |
| Shared, load-managed chargers for the whole building | Staged quote for the body corporate |
Every standard install includes its own circuit and safety switch protection, the cable run within the standard length, mounting and setup, full testing and a Certificate of Testing and Compliance. The charger itself is extra unless you already own one.
Keeping your Annerley install affordable
- If you rent, a written scope of works makes it easy for your landlord to say yes.
- Load management lets more chargers share the existing supply, avoiding a costly upgrade.
- Ask your committee about a building-wide plan. Sharing one backbone costs less per bay than one-off installs.
- Send clear photos of the switchboard and charger spot, so we can quote without a site visit.
Annerley is roughly 31 km from Mango Hill, around 35 minutes depending on inner-city traffic. Unit block quotes usually start with a quick visit to the car park and meter room.
Every Annerley job gets a fixed written price before any work starts, so the quote is what you pay. For a line-by-line breakdown, see the EV charger installation cost guide for Brisbane, or call 0474 207 609.
Annerley specifics
Annerley Junction, where Ipswich Road meets Annerley Road, is the suburb's traditional centre, and the city is only a short drive or bus ride away. Many residents drive less than average and can manage on a few charging sessions a week.
Some parts of Annerley sit within character overlays, which mostly limit changes to the street front of older homes. Placing a charger at the side, rear or under the house usually avoids any issue.
Many Annerley residents rent, especially in unit blocks. If that is you, your landlord, and for a unit the body corporate too, needs to approve a charger first. Our apartment charging page explains how buildings plan shared setups with billing.
How the installation works
- Step 1
Tell us about the job
Your car, the charger (if you have one) and a few photos. That is usually enough to price it.
- Step 2
Fixed price
You get a written quote with every item listed. No hourly surprises.
- Step 3
Installation day
A licensed electrician fits the circuit and charger, typically in 2 to 4 hours.
- Step 4
Handover
Testing, app setup, a test charge and your compliance certificate before we leave.
Annerley EV charging FAQs
My Annerley home has no driveway. Can I still get a charger?
Not a home charger, unfortunately. A wallbox needs off-street parking, because a charging cable cannot legally or safely run across a public footpath. If you have a carport or rear lane access, a charger may work there. Otherwise, nearby public or workplace charging is the practical option. We will tell you honestly whether your property suits a home install.
How much does EV charger installation cost in Annerley?
A standard single-phase install in Annerley is from $990 inc GST with Connex Electrical, plus the charger unless you already have one. Long cable runs, switchboard upgrades and three-phase chargers cost extra and are quoted in writing first. Most installs take 2 to 4 hours.
How can I keep EV charger installation affordable in Annerley?
For houses, keep the charger close to the switchboard and choose a 7kW single-phase unit, so the install stays at the standard $990 inc GST. For apartments, a shared, load-managed plan for the building costs less per bay than one-off installs. Every quote is fixed, so there are no surprises on the day.
Can I install an EV charger in my apartment car park?
Usually, but you need body corporate approval first. In Queensland, installing a charger on common property needs body corporate approval, and bodies corporate can make by-laws covering EV charging, metering and billing. We can supply a written proposal covering the circuit route, metering and load management that you can take to your committee, which makes approval much easier.
Can you install a charger in an older Queenslander?
Yes. Older homes just need a closer look at the wiring and switchboard first. Many still have original or partly upgraded boards that lack room or safety switches for a new circuit. The good news is that the space under a high-set Queenslander often makes the cable run easy. We inspect first and quote any switchboard work separately so you can see it.
I am renting. Can I still get a charger installed?
Yes, with your landlord or agent agreeing in writing first. A wallbox is a fixed electrical installation, so the owner must approve it. Many landlords say yes because it adds value to the property. We can give you a quote and a short scope of works to send to your property manager.
Also installing near Annerley
See every suburb in Southside, or read about home EV charger installation, commercial and body corporate charging and the cost of installation in Brisbane.
Book your Annerley EV charger install
Send a few details and photos of your switchboard and charger spot. Most homes can be quoted without a visit.
Call 0474 207 609Connex Electrical, QLD Electrical Contractor Licence #92217. $20M public liability. Based in Mango Hill, servicing Brisbane and Moreton Bay.