Cannon Hill QLD 4170 ยท Eastern Suburbs
EV Charger Installation Cannon Hill
Connex Electrical, a licensed electrical contractor (#92217) based in Mango Hill, installs EV chargers in Cannon Hill. Standard home installs are from $990 installed (inc GST), take about 2 to 4 hours and come with a fixed written quote. Cannon Hill has both older freestanding houses and newer townhouse complexes, so the plan for your charger depends mostly on which of the two you own.
- Licensed electrical contractor #92217
- $20M public liability
- Local team based in Mango Hill
- Fixed written quotes
- Read our Google reviews
Houses and townhouses in Cannon Hill
The established streets of Cannon Hill are lined with post-war timber and fibro houses, many lifted, extended or renovated over the years. Parking is often a carport beside the house or a garage built in underneath, with the meter box on the front or side wall. Where the board still has ceramic fuses or has been patched over several owners, it usually needs replacing before a 32A circuit goes on. Our switchboard upgrade page explains what that involves and why.
The newer townhouse complexes near the shopping centre and the station work differently. Each unit generally has its own meter, but the garage wall, the conduit route and sometimes the meter room are common property, so the body corporate has to agree first. We can prepare a written scope that shows exactly where the cable goes and how the power is metered, which gives the committee something concrete to vote on.
Either way, single-phase 7kW charging is plenty. A night on the wallbox covers a week of trips into the CBD or out along the Gateway.
What shapes a Cannon Hill install
With Cannon Hill station on the Cleveland line and Wynnum Road running through the suburb, a lot of local driving is short trips rather than long commutes. A car that rarely comes home empty does not need a fast charger, and some owners find they only plug in two or three nights a week.
On the detached houses, rooftop solar changes the sums. A charger that follows your solar output can fill the car on a Saturday while it sits in the carport, using power you would otherwise export for very little. Our guide to solar EV charging covers which chargers do this well.
If the carport is open to the weather, we fit a charger rated for outdoor use and mount it where the cable will not be driven over or left lying across the slab.
How much does EV charger installation cost in Cannon Hill?
In Cannon Hill, houses with a garage or carport near the board usually pay Connex Electrical's standard $990 inc GST, plus the charger. Apartment installs depend on the body corporate and the car park route, and older homes may need a switchboard upgrade. You get the full price in writing before booking.
| Situation | Price |
|---|---|
| Garage or carport close to a modern switchboard | From $990 installed (inc GST) |
| Older board with fuses or no safety switches | Standard price plus a switchboard upgrade, quoted separately |
| Apartment bay wired from your own meter, once the body corporate approves | Quoted after we check the car park route |
| Shared, load-managed chargers for the whole building | Staged quote for the body corporate |
The standard price covers a dedicated circuit with RCD protection, a standard cable run, mounting, charger setup, testing and your Certificate of Testing and Compliance. The charger itself is extra unless you already own one.
Keeping your Cannon Hill install affordable
- Ask your committee about a building-wide plan. Sharing one backbone costs less per bay than one-off installs.
- If you rent, a written scope of works makes it easy for your landlord to say yes.
- Send clear photos of the switchboard and charger spot, so we can quote without a site visit.
- Load management lets more chargers share the existing supply, avoiding a costly upgrade.
Cannon Hill is roughly 27 km from our Mango Hill base, about 30 minutes down the Gateway Motorway and over the Gateway Bridge outside peak hour, so a morning start is easy to arrange.
Every Cannon Hill job gets a fixed written price before any work starts, so the quote is what you pay. For a line-by-line breakdown, see the EV charger installation cost guide for Brisbane, or call 0474 207 609.
How it works
- Step 1
Request a quote
Use the form or call us. Photos of the meter box and garage speed things up.
- Step 2
We confirm the details
Supply capacity, cable route and any Energex requirements are checked before we book.
- Step 3
We install
Circuit, protection and charger, usually done in 2 to 4 hours.
- Step 4
You start charging
We commission the charger with your car and leave you with your Certificate of Testing and Compliance.
Suburbs close to Cannon Hill
See every suburb in Eastern Suburbs, or read about home EV charger installation, commercial and body corporate charging and the cost of installation in Brisbane.
Common questions in Cannon Hill
Can you mount a charger on a carport at an older Cannon Hill house?
Yes, as long as the post or wall is solid enough to carry it. On timber carports we often fix a backing board to a post or mount the unit on the house wall the carport is attached to. The cable runs in conduit from the meter box, and we pick a charger with a weather rating that suits an open-sided carport.
What does it cost to install an EV charger in Cannon Hill?
A standard single-phase install in Cannon Hill is from $990 inc GST with Connex Electrical, plus the charger unless you already have one. Long cable runs, switchboard upgrades and three-phase chargers cost extra and are quoted in writing first. Most installs take 2 to 4 hours.
What is the most affordable way to install an EV charger in Cannon Hill?
For houses, keep the charger close to the switchboard and choose a 7kW single-phase unit, so the install stays at the standard $990 inc GST. For apartments, a shared, load-managed plan for the building costs less per bay than one-off installs. Every quote is fixed, so there are no surprises on the day.
Can I install an EV charger in my apartment car park?
Usually, but you need body corporate approval first. In Queensland, installing a charger on common property needs body corporate approval, and bodies corporate can make by-laws covering EV charging, metering and billing. We can supply a written proposal covering the circuit route, metering and load management that you can take to your committee, which makes approval much easier.
Can you install a charger in an older Queenslander?
Yes. Older homes just need a closer look at the wiring and switchboard first. Many still have original or partly upgraded boards that lack room or safety switches for a new circuit. The good news is that the space under a high-set Queenslander often makes the cable run easy. We inspect first and quote any switchboard work separately so you can see it.
What is the cheapest way to charge an EV at home in Brisbane?
Charging from your own surplus solar is cheapest, followed by charging overnight on a time-of-use or controlled-load tariff. Energex controlled-load tariffs (Tariff 31 and 33) run on a separate circuit with supply only during set hours, so they suit overnight charging but not daytime solar charging. A time-of-use plan on a smart meter is the usual alternative. Your retailer sets the actual rates. We can wire the charger to suit whichever plan you choose.
Book your Cannon Hill EV charger install
Send a few details and photos of your switchboard and charger spot. Most homes can be quoted without a visit.
Call 0474 207 609Connex Electrical, QLD Electrical Contractor Licence #92217. $20M public liability. Based in Mango Hill, servicing Brisbane and Moreton Bay.