Ferny Hills QLD 4055 ยท Moreton Bay
EV Charger Installation Ferny Hills
Connex Electrical, a licensed electrical contractor (#92217) based in Mango Hill, installs EV chargers in Ferny Hills. Standard home installs are from $990 installed (inc GST), take about 2 to 4 hours and come with a fixed written quote. Ferny Hills commuters often catch the train from Ferny Grove, so the household EV is frequently a second car charged on a gentle overnight setting.
- Licensed electrical contractor #92217
- $20M public liability
- Local team based in Mango Hill
- Fixed written quotes
- Read our Google reviews
Hills, bush and Samford Road
Ferny Hills is hillier and leafier than its name might suggest, with bushland reserves running through it. Outdoor chargers here should handle leaves, possums and summer storms, so a weatherproof unit with a holster is a sensible choice.
Samford Road runs along the edge of the suburb, linking Ferny Hills with Ferny Grove, Samford and the city. Most drives from here are short, which suits EVs well. Even a trip into the CBD and back is a small fraction of a modern battery.
Crossing the council boundary from Brisbane makes no difference to the network: Ferny Hills homes are supplied by Energex, and we sort out whatever notification your connection needs. Our cost guide shows typical pricing.
Ferny Hills: one car on the train, one in the garage
With Ferny Grove station at the end of the line next door, many Ferny Hills households have one person commuting by train and a car that does local errands, school runs and weekend trips. That car may only cover 30 or 40 km a day, so a full 7kW charger is nice to have but not essential. A lower current setting is enough and can sometimes avoid a board upgrade.
Housing is mostly brick and timber homes from the 1970s and 1980s, many on steep, leafy blocks with a garage under the house. Where the meter box is on the same level, the install is usually straightforward.
If you expect to move to two EVs later, it is worth wiring for a full 32A now. The extra cost at install time is small compared with redoing the circuit. We can then cap the charger until you need the extra speed.
What an EV charger install costs in Ferny Hills
A standard single-phase EV charger installation in Ferny Hills costs from $990 inc GST with Connex Electrical, plus the charger if you need one. Most Ferny Hills houses pay just that. The price only rises for a long cable run, an older switchboard that needs upgrading, or a three-phase charger, and you see any extra in a fixed written quote first.
| Situation | Price |
|---|---|
| Garage or carport close to a modern switchboard | From $990 installed (inc GST) |
| Charger on the far side of the house, or a detached garage | Standard price plus the extra cable, quoted from photos |
| Older board with fuses or no safety switches | Standard price plus a switchboard upgrade, quoted separately |
| Three-phase home with an 11kW or 22kW charger | Quoted per job |
The standard price covers a dedicated circuit with RCD protection, a standard cable run, mounting, charger setup, testing and your Certificate of Testing and Compliance. The charger itself is extra unless you already own one.
Keeping your Ferny Hills install affordable
- Choose a 7kW single-phase charger. It suits almost every household and avoids three-phase costs.
- Charge overnight on an off-peak tariff, or from surplus solar, to keep running costs low.
- If a second EV is coming, size the cable for it now rather than paying for a second callout later.
- Already have a charger from the dealer? We install it, so you only pay for installation.
Ferny Hills is about 19 km from Mango Hill, roughly 20 minutes by road. We often have other jobs nearby, which helps with short-notice bookings.
Every Ferny Hills job gets a fixed written price before any work starts, so the quote is what you pay. For a line-by-line breakdown, see the EV charger installation cost guide for Brisbane, or call 0474 207 609.
From quote to first charge
- Step 1
Quote
Send photos of your switchboard and charger spot, or call. We reply with a fixed written price.
- Step 2
Site check
If anything is unusual, such as a long run or an older board, we check it in person first.
- Step 3
Install
Most standard installs take 2 to 4 hours on the day.
- Step 4
Test and certify
We test, commission the charger with your car and issue your Certificate of Testing and Compliance.
Nearby suburbs we also cover
See every suburb in Moreton Bay, or read about home EV charger installation, commercial and body corporate charging and the cost of installation in Brisbane.
EV charger questions from Ferny Hills
Our EV in Ferny Hills only does short trips. Do we need a full 7kW charger?
Not necessarily. If the car covers modest daily distances, a lower current charger, or a 7kW unit set to a lower current, will refill it overnight. That can avoid a switchboard upgrade on an older board. If you expect your driving to increase, we can wire for 32A now and limit the charger until you need more.
What does it cost to install an EV charger in Ferny Hills?
A standard single-phase install in Ferny Hills is from $990 inc GST with Connex Electrical, plus the charger unless you already have one. Long cable runs, switchboard upgrades and three-phase chargers cost extra and are quoted in writing first. Most installs take 2 to 4 hours.
What is the most affordable way to install an EV charger in Ferny Hills?
Put the charger close to the switchboard, choose a 7kW single-phase unit and send photos so we can quote without a visit. If you already have a charger, you only pay for installation, at the standard $990 inc GST. Every quote is fixed, so there are no surprises on the day.
Can I just charge from a normal power point?
You can, but it is slow. A standard 10A power point with the portable cable that came with the car adds roughly 10 to 15 km of range per hour, which may suit a short commute. A dedicated wallbox is several times faster, safer for long daily sessions and lets you schedule charging for cheaper tariff periods.
Can an EV charger be installed outside?
Yes. Most wallboxes are rated for outdoor use, so a carport post or external wall is fine. We still look at placement: out of direct afternoon sun where possible, clear of where water pools, and where the cable reaches the charge port without stretching across a path. A pedestal mount works where there is no wall nearby.
I am renting. Can I still get a charger installed?
Yes, with your landlord or agent agreeing in writing first. A wallbox is a fixed electrical installation, so the owner must approve it. Many landlords say yes because it adds value to the property. We can give you a quote and a short scope of works to send to your property manager.
Book your Ferny Hills EV charger install
Send a few details and photos of your switchboard and charger spot. Most homes can be quoted without a visit.
Call 0474 207 609Connex Electrical, QLD Electrical Contractor Licence #92217. $20M public liability. Based in Mango Hill, servicing Brisbane and Moreton Bay.