Lytton QLD 4178 ยท Eastern Suburbs
EV Charger Installation Lytton
Connex Electrical, a licensed electrical contractor (#92217) based in Mango Hill, installs EV chargers in Lytton. Standard home installs are from $990 installed (inc GST), take about 2 to 4 hours and come with a fixed written quote. Lytton is mostly port and industrial land with a small residential pocket, so many enquiries here are about workplace and fleet charging rather than homes.
- Licensed electrical contractor #92217
- $20M public liability
- Local team based in Mango Hill
- Fixed written quotes
- Read our Google reviews
Homes in and around Lytton
The handful of residential streets in Lytton are close to Wynnum and share its mix of older homes on decent blocks. If you live here, the install is a standard house job: we check the switchboard and supply, run a dedicated 32A circuit to the garage or carport, and mount a charger that suits where you park. Single-phase 7kW charging covers normal driving, and we would only suggest more if your car and supply support it.
Because the suburb is so close to the bay, salt air matters. We prefer chargers with good weather sealing and mount them under cover wherever we can.
If you are a worker at one of the port or industrial sites who drives an EV home, the right home charger is the same as anywhere else. What makes Lytton different is what happens at work, which is covered below.
EV charger installation cost in Lytton
Expect to pay from $990 inc GST for a standard single-phase charger install in Lytton, plus the charger itself. That is the price for most garages and carports. Long runs, switchboard upgrades and three-phase chargers are the only common extras, and Connex Electrical quotes them in writing before you book.
| Situation | Price |
|---|---|
| Garage or carport close to a modern switchboard | From $990 installed (inc GST) |
| Charger on the far side of the house, or a detached garage | Standard price plus the extra cable, quoted from photos |
| Older board with fuses or no safety switches | Standard price plus a switchboard upgrade, quoted separately |
| Three-phase home with an 11kW or 22kW charger | Quoted per job |
Every standard install includes its own circuit and safety switch protection, the cable run within the standard length, mounting and setup, full testing and a Certificate of Testing and Compliance. The charger itself is extra unless you already own one.
Keeping your Lytton install affordable
- Mount the charger on the garage wall closest to the meter box. A shorter run is the easiest saving.
- Already have a charger from the dealer? We install it, so you only pay for installation.
- If a second EV is coming, size the cable for it now rather than paying for a second callout later.
- Choose a 7kW single-phase charger. It suits almost every household and avoids three-phase costs.
Lytton is about 24 km from Mango Hill and roughly 25 minutes via the Gateway, so we can schedule site assessments around shift changes or quiet periods.
Every Lytton job gets a fixed written price before any work starts, so the quote is what you pay. For a line-by-line breakdown, see the EV charger installation cost guide for Brisbane, or call 0474 207 609.
Workplace charging in Lytton
Lytton is home to the Port of Brisbane approaches, Fort Lytton and large industrial sites along Lytton Road. Businesses here are starting to look at electric utes, vans and staff cars. Workplace charging needs a different design from a home install: we assess the site's three-phase supply, plan the number of bays now and later, and use load management so the chargers do not compete with machinery.
Fleet vehicles that come back to base each night are well suited to overnight AC charging. Where vehicles can accept it, 11kW or 22kW three-phase chargers cut the time needed. For more, see our commercial EV charger installation page.
Larger sites need checking against their Energex connection. We handle the paperwork and issue a Certificate of Testing and Compliance for every install.
How the installation works
- Step 1
Quote
Send photos of your switchboard and charger spot, or call. We reply with a fixed written price.
- Step 2
Site check
If anything is unusual, such as a long run or an older board, we check it in person first.
- Step 3
Install
Most standard installs take 2 to 4 hours on the day.
- Step 4
Test and certify
We test, commission the charger with your car and issue your Certificate of Testing and Compliance.
Lytton EV charging FAQs
Can you install fleet chargers at an industrial site in Lytton?
Yes. We start with a site assessment of the supply and how your vehicles are used, then propose a charger layout and load management plan. Fleet chargers can be set up to track energy per vehicle or driver. We work around your operating hours to minimise disruption.
How much does EV charger installation cost in Lytton?
A standard single-phase install in Lytton is from $990 inc GST with Connex Electrical, plus the charger unless you already have one. Long cable runs, switchboard upgrades and three-phase chargers cost extra and are quoted in writing first. Most installs take 2 to 4 hours.
How can I keep EV charger installation affordable in Lytton?
Put the charger close to the switchboard, choose a 7kW single-phase unit and send photos so we can quote without a visit. If you already have a charger, you only pay for installation, at the standard $990 inc GST. Every quote is fixed, so there are no surprises on the day.
Should I get a 7kW or 22kW charger?
For most homes, 7kW is the right choice. It works on single-phase power and fully charges most EVs overnight. A 22kW charger needs three-phase supply and only charges faster if your car supports 22kW AC, which many models do not; several are capped at 7kW or 11kW. Spending extra on 22kW rarely pays off for a single household car.
Do I need Energex approval to install an EV charger?
Energex rules for home EV chargers changed in October 2026, and we check the current requirements for your connection and lodge any notification Energex needs. For a typical single-phase home charger you do not need to apply for anything yourself. Three-phase chargers and multi-charger sites can need more checks against your connection, and we work through those before installation day.
What warranty do I get?
The charger carries the manufacturer's warranty, which varies by brand and is usually several years. Our workmanship is guaranteed too, and because we are a local Brisbane contractor rather than a call centre, you deal with the same team if anything needs attention. We will confirm the exact warranty terms for your charger in writing with the quote.
Also installing near Lytton
See every suburb in Eastern Suburbs, or read about home EV charger installation, commercial and body corporate charging and the cost of installation in Brisbane.
Book your Lytton EV charger install
Send a few details and photos of your switchboard and charger spot. Most homes can be quoted without a visit.
Call 0474 207 609Connex Electrical, QLD Electrical Contractor Licence #92217. $20M public liability. Based in Mango Hill, servicing Brisbane and Moreton Bay.