Willawong QLD 4110 ยท Southside
EV Charger Installation Willawong
Connex Electrical, a licensed electrical contractor (#92217) based in Mango Hill, installs EV chargers in Willawong. Standard home installs are from $990 installed (inc GST), take about 2 to 4 hours and come with a fixed written quote. Willawong is a mix of industrial land and newer residential streets, so we install home chargers here and also help local businesses plan workplace charging.
- Licensed electrical contractor #92217
- $20M public liability
- Local team based in Mango Hill
- Fixed written quotes
- Read our Google reviews
Newer homes in Willawong
The residential parts of Willawong are mostly newer houses, built in the last couple of decades on streets that sit apart from the industrial area. That usually means a modern switchboard with RCDs, a double garage and a meter box close by. For most homes, the install is a dedicated 32A circuit and a 7kW wallbox, completed in a few hours.
The main check on newer homes is whether the board has spare room and whether the supply can handle the charger along with air conditioning and other evening loads. If it is tight, a charger with load management balances the two, easing off while the oven and air conditioner run and picking up again later in the night.
If you are deciding between brands, think about whether you want app scheduling, solar tracking or a tethered cable. Our charger brands guide compares the models we install.
Willawong businesses and homes
Willawong's industrial area is home to warehouses, depots and workshops. If your business is adding electric vans or utes, workplace charging needs a different approach: a three-phase supply, multiple bays and load management so chargers do not compete with machinery. Our commercial EV charger installation page explains how we plan those sites.
For homes, the suburb's location near Pallara, Algester and Durack gives good access to main roads north and the Logan Motorway south. A 7kW charger easily covers daily driving, and if you run a work vehicle from home, we can talk about separate metering for it.
We check Energex requirements for your connection and handle any notification, and you receive a Certificate of Testing and Compliance after every install.
Our four-step process
- Step 1
Tell us about the job
Your car, the charger (if you have one) and a few photos. That is usually enough to price it.
- Step 2
Fixed price
You get a written quote with every item listed. No hourly surprises.
- Step 3
Installation day
A licensed electrician fits the circuit and charger, typically in 2 to 4 hours.
- Step 4
Handover
Testing, app setup, a test charge and your compliance certificate before we leave.
How much does EV charger installation cost in Willawong?
A standard single-phase EV charger installation in Willawong costs from $990 inc GST with Connex Electrical, plus the charger if you need one. Most Willawong houses pay just that. The price only rises for a long cable run, an older switchboard that needs upgrading, or a three-phase charger, and you see any extra in a fixed written quote first.
| Situation | Price |
|---|---|
| Garage or carport close to a modern switchboard | From $990 installed (inc GST) |
| Charger on the far side of the house, or a detached garage | Standard price plus the extra cable, quoted from photos |
| Older board with fuses or no safety switches | Standard price plus a switchboard upgrade, quoted separately |
| Three-phase home with an 11kW or 22kW charger | Quoted per job |
Every standard install includes its own circuit and safety switch protection, the cable run within the standard length, mounting and setup, full testing and a Certificate of Testing and Compliance. The charger itself is extra unless you already own one.
Affordable EV charger installation in Willawong
- Already have a charger from the dealer? We install it, so you only pay for installation.
- Choose a 7kW single-phase charger. It suits almost every household and avoids three-phase costs.
- Charge overnight on an off-peak tariff, or from surplus solar, to keep running costs low.
- If a second EV is coming, size the cable for it now rather than paying for a second callout later.
Willawong is about 40 km from Mango Hill, roughly 45 minutes via the Gateway Motorway. Business site assessments can be booked around your operating hours.
Every Willawong job gets a fixed written price before any work starts, so the quote is what you pay. For a line-by-line breakdown, see the EV charger installation cost guide for Brisbane, or call 0474 207 609.
Your questions, answered
Can you install chargers for a business depot in Willawong?
Yes. We assess your site's supply, which is often three-phase on industrial land, and design a layout for the number of vehicles you have now and expect later. Load management lets several chargers share capacity. We can also set up usage tracking per vehicle or driver.
How much does EV charger installation cost in Willawong?
A standard single-phase install in Willawong is from $990 inc GST with Connex Electrical, plus the charger unless you already have one. Long cable runs, switchboard upgrades and three-phase chargers cost extra and are quoted in writing first. Most installs take 2 to 4 hours.
How can I keep EV charger installation affordable in Willawong?
Put the charger close to the switchboard, choose a 7kW single-phase unit and send photos so we can quote without a visit. If you already have a charger, you only pay for installation, at the standard $990 inc GST. Every quote is fixed, so there are no surprises on the day.
Can a Tesla Wall Connector charge other EVs?
Yes. The current Tesla Wall Connector uses the standard Type 2 plug used in Australia, so it can charge non-Tesla EVs as well. It delivers up to about 7.4kW on single phase. It does not follow your solar surplus on its own (Tesla's solar charging features rely on other Tesla hardware), so solar owners who want that often choose a Zappi or Wattpilot instead.
Which EV charger should I buy?
Choose on three things: whether you want solar-matched charging, whether you need an app and scheduling, and your budget. A Tesla Wall Connector suits Tesla owners and works with other EVs too. A Zappi or Wattpilot suits solar homes. Simpler units suit plain overnight charging. Tell us your car and setup and we will recommend two or three options.
Do I need Energex approval to install an EV charger?
Energex rules for home EV chargers changed in October 2026, and we check the current requirements for your connection and lodge any notification Energex needs. For a typical single-phase home charger you do not need to apply for anything yourself. Three-phase chargers and multi-charger sites can need more checks against your connection, and we work through those before installation day.
Other suburbs around Willawong
See every suburb in Southside, or read about home EV charger installation, commercial and body corporate charging and the cost of installation in Brisbane.
Book your Willawong EV charger install
Send a few details and photos of your switchboard and charger spot. Most homes can be quoted without a visit.
Call 0474 207 609Connex Electrical, QLD Electrical Contractor Licence #92217. $20M public liability. Based in Mango Hill, servicing Brisbane and Moreton Bay.